Home>Product>Heating/Dehumidifying System
  • 加路力士制冷机.jpg

Refrigerator for bath pool

Cooling capacity
Net weight

Product features

The refrigeration principle of calorex refrigerator is that the compressor compresses the lower-pressure steam into higher-pressure steam, so that the volume of the steam is reduced and the pressure is increased. The compressor sucks in the lower-pressure work from the evaporator. The high-quality vapor is sent to the condenser after the pressure is increased, where it is condensed into a higher-pressure liquid. After being throttled by the throttle valve, it becomes a lower-pressure liquid and then sent to the evaporator. The middle absorption heat evaporates and becomes a lower pressure steam, which is then sent to the inlet of the compressor to complete the refrigeration cycle.

High heat exchange efficiency and compact structure: The heat exchange tube adopts high-efficiency internally threaded tubes, and the heat transfer coefficient is more than twice that of traditional shell and tube heat exchangers.

The inlet and outlet of the refrigerant are cleverly sealed to avoid water leakage: the seal is made of high temperature resistant materials, which can withstand 200*C high temperature and -20C low temperature.

Filling with heat insulation material to reduce heat leakage: Fill the foam material between the steel shell and the engineering plastic shell. Effectively reduce the heat leakage of the heat exchanger:, the user does not need to carry out additional insulation around the shell.

Corrosion resistance, long life, not easy to be blocked on the water side: Engineering plastics are more resistant to various corrosions and have a longer lifespan than metals. The water side volume of the heat exchanger is more than twice that of the plate heat exchanger, and it is more resistant to dirt and clogging.

Independent joint is more durable: the nozzle is made of metal material, which is firm and durable.

It can be used under special water quality: it can effectively resist different degrees of acid and alkali, chloride ion corrosion and scouring of sediment.

Product details

Refrigerant circulation system

The liquid refrigerant in the evaporator absorbs the heat in the water and starts to evaporate. Finally, a certain temperature difference is formed between the refrigerant and the water. The liquid refrigerant also completely evaporates into a gaseous state, and is sucked and compressed by the compressor (pressure and temperature increase) ), The gaseous refrigerant absorbs heat through the condenser (air-cooled/water-cooled) and condenses into a liquid. After throttling through an expansion valve (or capillary tube), it becomes a low-temperature and low-pressure refrigerant and enters the evaporator to complete the refrigerant cycle process.

water circulatory system;
The water pump is responsible for pumping the water out of the water tank to the user's equipment that needs to be cooled. After the chilled water takes away the heat, the temperature rises, and then returns to the chilled water tank.

Application scenario

CA series refrigerators are suitable for cooling saunas and baths. It is recommended to install them outdoors or in well-ventilated places.

kiyea leisure and sport supplies inc

One-stop swimming pool sauna equipment supplier, first-hand source, affordable price!

  • *
  • *
  • *

Ask Us About Poo lEquipment!

Related Articles

25 years + experience in the swimming pool industry 280 national after-sales service outlets 100,000 worldwide + swimming pool project cases

Do the math, how to configure my swimming pool equipment

Configuration calculatorToday 22 customers have obtained the configuration plan

  • Pool type:
  • Pool specs:
  • Cycle time:
  • Pool scene:
  • Cellphone:
  • *For your benefit and our reputation, your information will be strictly protected.


How much equipment do you need for your swimming pool?

  • Pool water pump:?
  • Pool sand tank:?
  • Constant temperature:?
  • Disinfection equipment:?
  • Suction machine:?